Navigation
BEST-EX, INC. • P.O. Box 454 • 820 Industrial Court • Baraboo WI 53913-0454
Phone: (608) 356-4882 • Toll-Free: (800) 356-4882 • Fax: (608) 356-4883 • e-mail
STANDARD MOUNT FRAMES
 |
POST MOUNT The Post Mount Frame attaches to a customer-supplied wood post at either a 30 or 45 degree angle. This style is a durable and economical choice for any project. Signs are easily installed by removing the top rail of the frame, inserting the sign, and replacing the top rail. |
 |
FLUSH MOUNT The Flush Mount Frame attaches to a customer-supplied wood post and is perpendicular to the ground. Included with this frame is a “post protector” bracket. This bracket is placed between the frame and the post, held in place by the wood screws. The post protector covers the top of the wood post to protect it from weathering. Signs are easily installed by removing the top rail of the frame, inserting the sign, and replacing the top rail. |
 |
WALL MOUNT The Wall Mount Frame is very similar to the Flush Mount Frame. The wood screws which are provided, go through the countersunk holes in the back plate of the frame and into your mounting surface. The frame is slightly off-set from the mounting surface to accommodate uneven surfaces and to allow the removal of one edge of the frame for installation of the sign after the frame is mounted. Any side of the frame can be the removable edge, so you may want to consider the accessibility of installing your sign when ordering your frame. |
 |
UPRIGHT MOUNT The Upright Frame can be mounted in several ways. They can be mounted as a single frame with a post on each side, a line of frames, or a cluster of frames. The frames attach to customer supplied wood posts with lag screws (provided). With an additional bracket, you can have a cluster of 3, 5, or more frames. Special configurations may require additional brackets, so talk to us about your design. You can even use these frames back-to-back for a 2-sided exhibit (requires 6” posts). Signs are easily installed by removing the top rail of the frame, inserting the sign, and replacing the top rail. |
 |
RAIL AND DECK MOUNT The rail and deck mount frames are our standard frames adapted to mount to various rail & deck systems. The actual configuration depends entirely upon what type of railing or deck you are mounting to. We can design a mount to work on most any railing or deck and whether it is round, square, metal or wood. If you want to mount to a rail or a deck, please call for additional information. It is also very helpful if a photo of the mounting area can be sent to us, to aid us in fitting your situation. |
 |
POST WITH PLATE Our standard frame can be mounted to aluminum “Post with Plate.” Posts with plates are 2”x 4” rectangular aluminum tube which is attached directly to the aluminum back plate of the frame with standard hardware. The posts are finished to match the frame, and give a slightly more formal look to your exhibit. Frames can be mounted at either 30 or 45 degree angle. |